how to sand antique furniture

Best answer


1. On bare wood,lightly sand the surface with150-grit sandpaperto remove nicks,scratches,and to open up the pores of the wood grain. 2. Wipe off the sanding dust with a tack cloth. 3. Brush on wood conditioner prior to staining. Allow the conditioner to dry for 15 minutes.

People also ask


  • How to sand wood furniture?

  • To remove any stripper residue and set the wood up to accept a finish, 220 open coat aluminum oxide is good. To sand various shapes and moldings on your piece you can use old felt. Important information on sandpaper: The 120 refers to the grit size. The lower the number, the coarser the paper. You can also sand the furniture with steel wool. [5]

  • How long does sanding furniture take?

  • Sanding a furniture piece should never take more than 5 minutes. When prepping a piece for paint, you are just roughing up the surface slightly so that the paint will 渟tick? If the existing surface is shiny, the paint won have anything to grab onto. Therefore, you are giving the surface some 渢ooth? as they say, so the new paint will adhere.

  • How do you sand and stain old felt?

  • To sand various shapes and moldings on your piece you can use old felt. Important information on sandpaper: The 120 refers to the grit size. The lower the number, the coarser the paper. You can also sand the furniture with steel wool. [5] Furniture Refinishing Home Remodeling Specialists Expert Interview. 29 October 2021. Stain the piece.

  • What happens if you sand furniture with too much paper?

  • Although finer-grit paper would theoretically produce a smoother surface, sanding with too fine a paper can clog the wood and interfere with finishing. Sand the entire piece of furniture with each grade of sandpaper before moving on to the next grade.

    Leave a Reply

    Your email address will not be published.